[SOLVED] oeSENC Plugin install error - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] oeSENC Plugin install error (/showthread.php?tid=3352) |
[SOLVED] oeSENC Plugin install error - SkibladnerII - 2021-03-23 Hey I have today installed OpenPlotter on my RPi4 Model 4 8 GB. i will in OpenCPN add oeSENC plugin, it gets installed and removed again, because it says OpenCPN does not fit this version. then I have tried to update all programs in the settings menu and it has not helped I really hope someone can help MVH Benjamin Skipper on Skibladner II RE: oeSENC Plugin install error - verkerkbr - 2021-03-24 (2021-03-23, 09:02 PM)SkibladnerII Wrote: Hey Hi B, if you use the usb Oesenc plug. Then sometimes a file is missing: try installing libusb-0.1-4. If you use 64 bits RaspiOS you need another version of the Oesenc plugin. Bram RE: oeSENC Plugin install error - SkibladnerII - 2021-03-24 (2021-03-24, 10:00 AM)verkerkbr Wrote:(2021-03-23, 09:02 PM)SkibladnerII Wrote: Hey How to do that, I am brand new in this Rpi4 world RE: oeSENC Plugin install error - verkerkbr - 2021-03-24 (2021-03-24, 12:27 PM)SkibladnerII Wrote:(2021-03-24, 10:00 AM)verkerkbr Wrote:(2021-03-23, 09:02 PM)SkibladnerII Wrote: Hey Installing this file in a Linux system terminal is: sudo apt install libusb-0.1.-4. And don't forget to switch the Oesenc plugin to on ! (Plugin menu) What operating system do you use ? Bram RE: oeSENC Plugin install error - SkibladnerII - 2021-03-24 (2021-03-24, 01:30 PM)verkerkbr Wrote:pi@openplotter:~ $ sudo apt install libusb-0.1.-4.(2021-03-24, 12:27 PM)SkibladnerII Wrote:(2021-03-24, 10:00 AM)verkerkbr Wrote:(2021-03-23, 09:02 PM)SkibladnerII Wrote: Hey Indlæser pakkelisterne... Færdig Opbygger afhængighedstræ Læser tilstandsoplysninger... Færdig E: Kunne ikke lokalisere pakken libusb-0.1.-4. E: Kunne ikke finde nogle pakker med glob »libusb-0.1.-4.« E: Kunne ikke finde nogle pakker med regulært udtryk »libusb-0.1.-4.« pi@openplotter:~ $ sudo apt install libusb-0.1.-4 Indlæser pakkelisterne... Færdig Opbygger afhængighedstræ Læser tilstandsoplysninger... Færdig E: Kunne ikke lokalisere pakken libusb-0.1.-4 E: Kunne ikke finde nogle pakker med glob »libusb-0.1.-4« E: Kunne ikke finde nogle pakker med regulært udtryk »libusb-0.1.-4« pi@openplotter:~ $ does not work RE: oeSENC Plugin install error - SkibladnerII - 2021-03-25 I have been in contact with o-charts.org and their response was: Hi Benjamin, There is a small bug in OpenCPN that will be fixed on next versions. Please open an terminal and type this to install a required package: sudo apt install opencpn-sglock-arm32 You are right something is not working as it should with the oeSENC plugin on Raspberry. I have been able to reproduce your issue. I will escalate this to plugin developers and I will back to you with a solution ASAP. usb key can be seen by RPi4. lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 1547:1000 SG Intec Ltd & Co KG SG-Lock[U2] Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub now I am awaiting a response from o-charts.org thanks for the help so far RE: oeSENC Plugin install error - SESTH - 2021-03-27 I had the same problem with oeSENC 4.2.19.10. Today after updating to oeSENC 4.2.19.16 it was gone. But now I have the Problem described here: https://forum.openmarine.net/showthread.php?tid=3353 Thomas RE: oeSENC Plugin install error - SkibladnerII - 2021-03-28 open an terminal and type this to install a required package: sudo apt install opencpn-sglock-arm32 Then start OpenCPN that worked for me. |