Node Red fails when trying to process SignalK message - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Node Red (https://forum.openmarine.net/forumdisplay.php?fid=15) +--- Thread: Node Red fails when trying to process SignalK message (/showthread.php?tid=3453) |
Node Red fails when trying to process SignalK message - baltika_no_9 - 2021-05-22 I am trying to pass a SignalK message to node red. I add a SignalK suscribe node and configure it with Source/path etc. When I deploy it node red fails and goes into a start/fail loop: Code: 22 May 14:36:16 - [info] Stopping flows In Signalk the signalk-node-red plugin is installed and running. In node red I have signalk/node-red-embedded installed. All appears to be at the latest version. Platform is Raspberry pi. The only way to get out is to delete my flows_xxxxxxx.json If anyone can help resolve this I'd very much appreciate it. RE: Node Red fails when trying to process SignalK message - PaddyB - 2021-05-22 difficult to say much without seeing the actual flow.. RE: Node Red fails when trying to process SignalK message - baltika_no_9 - 2021-05-22 A fair point. The "flow" is trivial, a single signalk Subscribe node and nothing else. [{"id":"a31e7b75.60da78","type":"tab","label":"Flow 1","disabled":false,"info":""},{"id":"2dc3c3b2.d8c90c","type":"signalk-subscribe","z":"a31e7b75.60da78","name":"Temp","mode":"sendAll","flatten":true,"context":"vessels.self","path":"environment.inside.temperature","source":"OpenPlotter.I2C.BMP280","period":1000,"x":180,"y":220,"wires":[[]]}] ~ RE: Node Red fails when trying to process SignalK message - PaddyB - 2021-05-22 Hmm, works fine here - are you running node-red from the webapps link in signalk? RE: Node Red fails when trying to process SignalK message - baltika_no_9 - 2021-05-22 (2021-05-22, 08:02 PM)PaddyB Wrote: Hmm, works fine here - are you running node-red from the webapps link in signalk? PaddyB Thank you, no is the answer I was just running directly via my browser. I'd no idea that the webapp existed but when I tried it then it worked fine! I need now to understand the difference between the two. Thanks again, I appreciate your help. |