+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Desparate to get RPI 4 to save settings (/showthread.php?tid=3481)
Desparate to get RPI 4 to save settings - burgoynebc@netscape.net - 2021-06-04
I have tried repeatedly to get RPI 4 running openplotter to save the configuartion settings.
Every time I power down, and after have spent hours setting up sensors, AIS rtl sdr. signal k, serial, I2C, alll setups are completely wiped out. Nothing gets saved.
Either a setup requires reboot to complete it, or I simply have to shut down overnight, on reboot I have to reestablish all settings.
Is there no way to save settings before powering down????????????????????
Very fraustrated trying to upgrade to rpi after years running arduino autopilot and seaclear chartplotter. I must be missing something here but I have printed out everything I can find on the docs
Richard
sv Zolanda
RE: Desparate to get RPI 4 to save settings - Sailoog - 2021-06-08
that is really strange, has your SD card some kind of write protection? are you using the official OP images? have you tested another SD card?