Toggle fullscreen in touchscreen mode - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Feature Requests (https://forum.openmarine.net/forumdisplay.php?fid=5) +--- Thread: Toggle fullscreen in touchscreen mode (/showthread.php?tid=3515) |
Toggle fullscreen in touchscreen mode - HenryB - 2021-06-20 I'm running OpenCPN on a Raspberry Pi 4 and Raspberry Pi touchscreen without any problems. It would be nice to be able to toggle fullscreen mode by the means of a toolbar button, i.e. without having a keyboard or mouse attached. Cheers Henry RE: Toggle fullscreen in touchscreen mode - Luckbert - 2021-06-20 Hello, You can set the full screen mode in the context menu. So simulate right mouse button and then you will find the right button. Greetings Jürgen RE: Toggle fullscreen in touchscreen mode - HenryB - 2021-06-21 Hi Jürgen, from a pure technical point of view suggested solution is sufficient. It does however not increase usability on mouse- and keyboard less (i.e. touchsceen) systems. Cheers Henry RE: Toggle fullscreen in touchscreen mode - Luckbert - 2021-06-21 Hello Henry, I use vnc or teamviewer. I always use either a handheld or a tablet (always touch). Depending on the software, either with "two fingers on display" or "one finger long on one spot". This triggers the right click and I can switch to full screen that way. Greetings Jürgen |