Signal K stream not appearing in UDP etc.. & Node red - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Signal K stream not appearing in UDP etc.. & Node red (/showthread.php?tid=370) |
Signal K stream not appearing in UDP etc.. & Node red - Littlechay - 2017-02-28 I have fired up the lastest version of OP 0.9 downloaded from the OP site. I have a bunch of sensors connected up; GPS HAT, RTC, 9axis MPU, pressure, humidity, temperature probes etc.. I can see data from all of the sensors in Signal K diagnostics but nothing seems to get though to the UDP NMEA 0183 data stream. I have tried using the NMEA 0183 generator to generate sentences but no luck there. I have seen reference to setting the language to English. Is this the system language or just the OP language? I am running in english with a UK english keyboard. Any ideas? Second question. I have been playing with Node Red, it seems rather flaky, but i have got temperature from a probe to show up on a dial occasionally. Literature on Node Red seems to be in short supply. Can anybody point me at a decent reference to constructing the messages in the Node Red JSON path node panel? Cheers Chris RE: Signal K stream not appearing in UDP etc.. & Node red - Littlechay - 2017-02-28 Clarification - the msgs that I format using the NMEA 0183 generator appear in the TCP stream but not UDP. |