Issue with tinycore + pypilot hat / Does not find IMU - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: Issue with tinycore + pypilot hat / Does not find IMU (/showthread.php?tid=3701) Pages:
1
2
|
RE: Issue with tinycore + pypilot hat / Does not find IMU - damien - 2021-10-03 (2021-10-03, 12:17 PM)MBJ335 Wrote: Hello Xavier, Hi, I may advise two possibilities: - Should you have a WiFi router hooked on the network, you can setup tinypilot WiFi on that router and you should be able to reach github - Should you be familiar with ssh, you can download the content on an alternate machine and copy it on the tinypilot ; example with a linux box: Code: # Linux box hooked at first on a network having internet connection Otherwise, as Sean advised, wait a little for the release of the next tinypilot image. Best regards, Xavier. RE: Issue with tinycore + pypilot hat / Does not find IMU - MBJ335 - 2021-10-03 (2021-10-03, 07:55 PM)damien Wrote:(2021-10-03, 12:17 PM)MBJ335 Wrote: Hello Xavier, Thank you so much for your help, i managed it by switching the sd card from the computer to the raspberry, it is a bit dirty but it worked out...the build routine must be launched from where the file is stored, that was my mistake! Anyway I will wait for the next tinypilot image release from Sean (no hurry...) Kind regards, MBJ RE: Issue with tinycore + pypilot hat / Does not find IMU - rastam4n - 2022-03-24 I am having the same issue I suspect. After connecting tinypilot to my network using the client wifi settings I still cannot seem to download the repository Any suggestion on what the problem might be? tc@box:~/RTIMULib_update$ git clone git://github.com/seandepagnier/RTIMULib2.git Cloning into 'RTIMULib2'... fatal: Unable to look up github.com (port 9418) (Temporary failure in name resolution) RE: Issue with tinycore + pypilot hat / Does not find IMU - ironman - 2022-03-24 From the workbook: "If you specified a fixed ip address (Client Mode Address), you will get the message fatal: Unable to look up github.com (port 9418) (Temporary failure in name resolution). Understandable, because you have not specified a fixed dns and gateway yet. Make sure there's nameserver 8.8.8.8 in /etc/resolve.conf, and specify a default gateway e.g. sudo route add default gw 10.10.10.1" RE: Issue with tinycore + pypilot hat / Does not find IMU - seandepagnier - 2022-03-24 Sometimes it will also fail from ssl issues. A simple way around this, is to clone to another system (not tinycore linux) then clone from that: tc@box:~/RTIMULib_update$ git clone user@<other-ip-address>eandepagnier/RTIMULib2 Or update to my latest image: https://pypilot.org/images Also check the forum for stelian's image for pi zero w2. I fully intend to integrate utilize it soon.... when I can find time to verify. It should support icm20948 too. RE: Issue with tinycore + pypilot hat / Does not find IMU - rastam4n - 2022-03-25 (2022-03-24, 06:41 PM)ironman Wrote: From the workbook: "If you specified a fixed ip address (Client Mode Address), you will get the message fatal: Unable to look up github.com (port 9418) (Temporary failure in name resolution). Understandable, because you have not specified a fixed dns and gateway yet. Make sure there's nameserver 8.8.8.8 in /etc/resolve.conf, and specify a default gateway e.g. sudo route add default gw 10.10.10.1" Yep, you nailed it... I specified an IP so I could ssh in without guessing what it might be. That workbook is full of interesting things I was not aware of. I will refer to it going forward. Who ever wrote it deserved a lot of credit. A ton of work has gone into that! RE: Issue with tinycore + pypilot hat / Does not find IMU - MBJ335 - 2022-05-03 (2022-03-24, 07:18 PM)seandepagnier Wrote: Sometimes it will also fail from ssl issues. A simple way around this, is to clone to another system (not tinycore linux) then clone from that: Hi I've just tried the most recent 2021-11-16 version of tinypilot image and the icm20948 is supported right away. Also the problem i had with wifi starting up only occasionally seems solved. Compass offset bug is solved as well. I am going to try it at sea later on this week. Also the web interface speaks french now...well a kind of french, sometimes quite funny i must say :-)), Sean if you wish i can correct the mistakes, in that case let me know the best way to proceed. Mbj RE: Issue with tinycore + pypilot hat / Does not find IMU - seandepagnier - 2022-05-04 The translations are "auto generated" unless human corrected. I am happy to accept changes, the only real issue is the german translation was also "funny" and two different german speakers disagreed on how to change it. The easiest way is to edit and submit a pull request or email me the changes to this file: https://github.com/pypilot/pypilot/blob/master/web/translations/fr/LC_MESSAGES/messages.po RE: Issue with tinycore + pypilot hat / Does not find IMU - MBJ335 - 2022-05-05 (2022-05-04, 05:45 PM)seandepagnier Wrote: The translations are "auto generated" unless human corrected. Ok, i'm not surprised they are Germans after all, they like precision! i'll take a look into it and will propose only changes i am sure of (let's say at 99%) |