+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: B&G H1000 Support Post (/showthread.php?tid=3742)
B&G H1000 Support Post - Island_Moose - 2021-10-21
Anyone out there with a B&G H1000 system will feel my pain. This is good quality equipment that is now outdated and abandoned by the manufacturer. I set out to replace the chartplotter and bring my system into the 21st century, and I have finally done it. It took months of research, as the H1000 system uses proprietary cabling and protocols. But it CAN BE DONE!! Don't spend $10K on a new system until you stop here first.
If you've got one and you're struggling...post here.
RE: B&G H1000 Support Post - HeviiSailor - 2022-04-28
(2021-10-21, 01:29 AM)Island_Moose Wrote: Anyone out there with a B&G H1000 system will feel my pain. This is good quality equipment that is now outdated and abandoned by the manufacturer. I set out to replace the chartplotter and bring my system into the 21st century, and I have finally done it. It took months of research, as the H1000 system uses proprietary cabling and protocols. But it CAN BE DONE!! Don't spend $10K on a new system until you stop here first.
If you've got one and you're struggling...post here.
Hello Moose,
I'll have one shortly. It's attached to my new (old) boat, a Scampi 30. While I'm still working on the delivery, I'd like to prepare for the integration of this old B&G hardware into my OpenCPN system (which I've recently started to collect for assembly). Since I can't find any Raspberry Pis, I've loaded OpenPlotter onto an old Netbook. I'm looking forward to putting everything together. Any wisdom which you can provide will certainly be appreciated.
RE: B&G H1000 Support Post - MarineW29 - 2024-01-01
Hi @Island_Moose,
I have a B&G H1000 system, including in particular an autopilot.
Unfortunately, the autopilot control panel is not waterproof anymore. I plan to sail on longer navigations, and even to sail for a year around the atlantic in a few years. So this situation isn't acceptable.
Besides, this autopilot is not completely reliable, it tends to turn off sometimes without explanation.
I would like :
- initially if possible, replace only the autopilot control panel with a solution based on OpenPlotter / pypilot
- in a second step perhaps, replace other electronic parts of the autopilot system
Is the first step possible ?
Thanks !