+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Moitessier hat 2 - AIS problem (/showthread.php?tid=3745)
Moitessier hat 2 - AIS problem - zankiki - 2021-10-25
Hi,
I have moitessier hat 2 about 1.5 year, and I am more than satisfied. In last couple of weeks I have problem with AIS - reception is very poor, I only cath signal from range 200-300 meters, no more.
I tryed another antenna, but without succes. Any ideas?
RE: Moitessier hat 2 - AIS problem - fishy - 2021-10-25
(2021-10-25, 10:43 AM)zankiki Wrote: Hi,
I have moitessier hat 2 about 1.5 year, and I am more than satisfied. In last couple of weeks I have problem with AIS - reception is very poor, I only cath signal from range 200-300 meters, no more.
I tryed another antenna, but without succes. Any ideas?
How do you connect your antennas? Can it be the problem is in the pigtail?
RE: Moitessier hat 2 - AIS problem - zankiki - 2021-10-26
No, I don`t gave pigtail, antenna connects direct to HAT.
RE: Moitessier hat 2 - AIS problem - holgerw - 2021-10-26
bad, idea without pigtail, mechanicallly. so check the copper traces on the board. with some luck you can repair the haircracks with some solder. measure for NOT shorts ;-).