+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18)
+--- Thread: New Py Zero 2 W is Out! (/showthread.php?tid=3754)
RE: New Py Zero 2 W is Out! - seandepagnier - 2022-08-07
Does the motor work? It appears it is not working and constantly probing it.
RE: New Py Zero 2 W is Out! - Vlisie - 2022-08-07
Yes it does but in a shocking motion and when I +10 and later -10 it doesn't come back exactly to its previous extension.
RE: New Py Zero 2 W is Out! - seandepagnier - 2022-08-08
I think there is something wrong with your motor controller or the data connection to it.
RE: New Py Zero 2 W is Out! - hans-martijn - 2022-09-19
I am using a Zero 2, and I only recently tried to zeroconf it to signalk (I use nmea0183 at the moment). When I check (running signalk.py) I get the following error:
signalk probe... 192.168.42.10:3000
signalk could not import requests No module named 'urllib3'
try 'sudo apt install python3-requests' or 'pip3 install requests'
It looks like the modules are there, but they simply don't work. It's not a major issue, but it is strange nonetheless.
-Hans
RE: New Py Zero 2 W is Out! - seandepagnier - 2022-09-19
What do you get if you run python3 then
>>> import requests
RE: New Py Zero 2 W is Out! - stelian - 2022-09-19
You need to load some tinycore extensions first: tce-load -i python3.8-urllib3 python3.8-chardet python3.8-certifi python3.8-idna
After that it should work. If you want those to be persistent add them to /opt/bootlocal.sh and run filetool.sh -b
Not sure these should be loaded by default, in order to make zeroconf working, because I don't use it myself...
RE: New Py Zero 2 W is Out! - seandepagnier - 2022-09-20
I have too many things to fix and after years of this I slow down.
I didn't fully test all the functions on the tinycore13 image yet, sorry.. it may be zeroconf/signalk is not working fully?
RE: New Py Zero 2 W is Out! - stelian - 2022-09-20
That's why we need more testers and more feedback.
@Hans: if you are able to test zeroconf and signalk in your setup, try the above and if it works, I'll be happy to build a new tinycore13 image !
RE: New Py Zero 2 W is Out! - hans-martijn - 2023-01-06
Hi Stelian,
Sorry for the humonguous delay, I had no power on my boat anymore, so I had to buy new batteries.
The zeroconf actually works as you described, so everything works right now. If you are going to build a new tinycore13 image, don't forget to add the usb connector.
Thanks (again) and kind regards,
Hans
RE: New Py Zero 2 W is Out! - stelian - 2023-01-06
Hi hans-martijn,
Thanks for the confirmation. I may release a new version in the upcoming weeks, unless Sean beats me to it.