Garmin GPS18x USB SOLVED - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Garmin GPS18x USB SOLVED (/showthread.php?tid=383) |
Garmin GPS18x USB SOLVED - svhulagirl - 2017-03-15 Hello all, I've got a Garmin GPS18x USB. On a previous install of OpenCPN it was working flawlessly. Since starting up a new card/install of OpenPlotter I cannot get OpenCPN to get GPS. I've done quite a bit of googling and searching CF and so far have not found a solution. Thanks in advance for any help. Here's what the pi knows about the Garmin: [pi@openplotter:~] $ dmesg | grep garmin [ 8.294337] usbcore: registered new interface driver garmin_gps [ 8.294556] garmin_gps 1-1.3:1.0: Garmin GPS usb/tty converter detected -- [pi@openplotter:~] $ lsusb Bus 001 Device 006: ID 062a:4101 Creative Labs Bus 001 Device 005: ID 091e:0003 Garmin International GPS (various models) Bus 001 Device 004: ID 125f:a65a A-DATA Technology Co., Ltd. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- Auto setup detects hardware. Please make sure that all devices are turned on. search for tty devices found: /dev/ttyUSB0 091e 0003 1-1.3:1.0 GPS (various models) Garmin International sort tty devices check if we have to switch from dev to port test ['', '091e', '0003', '', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', 'GPS (various models)', 'Garmin International', 0] search for NMEA0183 in tty devices search NMEA0183 on /dev/ttyUSB0 with baudrate 4800 search NMEA0183 on /dev/ttyUSB0 with baudrate 38400 search NMEA0183 on /dev/ttyUSB0 with baudrate 115200 search NMEA0183 on /dev/ttyUSB0 with baudrate 9600 search NMEA0183 on /dev/ttyUSB0 with baudrate 19200 search NMEA0183 on /dev/ttyUSB0 with baudrate 57600 create an autoname for found NMEA0183 devices search for NMEA2000 in tty devices ['', '091e', '0003', '', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', 'GPS (various models)', 'Garmin International', 0] n2k ['', '091e', '0003', '', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', 'GPS (various models)', 'Garmin International', 0] 115200 start search NMEA2000 on /dev/ttyUSB0 with baudrate 115200 not found NMEA2000 on /dev/ttyUSB0 with baudrate 115200 ########################## result ################################ add new devices to openplotter.conf - none - add new devices to kplex (not activated and no filter) - none - RE: Garmin GPS18x USB SOLVED - svhulagirl - 2017-03-16 I've gotten this to work by issuing: sudo apt-get install gpsd gpsd-clients libgps-dev I added the Garmin GPS18x USB as connected directly through network: Options→ Connections→ Add Connection and select “Network” plus the GPSD radio button. Address should be “localhost” and DataPorts should be set to 2947. More info here: https://opencpn.org/wiki/dokuwiki/doku.php?id=opencpn:opencpn_user_manual:getting_started:gps_setup |