+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: GPS and SignalK (/showthread.php?tid=3855)
Pages:
1
2
RE: GPS and SignalK - verkerkbr - 2022-01-12
If it works in OpenCPN direct, you can also add this setting to SignalK. Don't forget to restart the SignalK server if you made changes and you have to logon first.
If is works and data is coming in, you a yellow line appearing. Then the GPS is woirking in SignalK.
Then indicate in OpenCPN network localhost Signalk port 2000.
SignalK works great as data server/multiplexer.
Bram
RE: GPS and SignalK - yvereg - 2022-01-12
(2022-01-12, 10:22 AM)verkerkbr Wrote: If it works in OpenCPN direct, you can also add this setting to SignalK. Don't forget to restart the SignalK server if you made changes and you have to logon first.Hello , again thanks for your help.
If is works and data is coming in, you a yellow line appearing. Then the GPS is woirking in SignalK.
Then indicate in OpenCPN network localhost Signalk port 2000.
SignalK works great as data server/multiplexer.
Bram
Now all is OK, probably I forget to restart signalk or I do not wait enough time for the gps synchro.
In opencpn my config is network/TCP/10.10.10.1/10110. I do not succeed with network/signalK/localhost/3000
Yves