OpenPlotter 3 roadmap - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: OpenPlotter 3 roadmap (/showthread.php?tid=3878) |
RE: OpenPlotter 3 roadmap - Hobo - 2022-04-16 After installing Openplotter 3 and Opencpn 5.6 flatpak via Openplotter 3, Opencpn does not start. also if I try it via the tereminal : flatpak run org.opencpn.OpenCPN invalid MIT-MAGIC-COOKIE-1 key15:22:44: Error: Unable to initialize GTK+, is DISPLAY set properly? In the Check system app I see the following error: Checking OpenCPN... | running | | FP fullscreen autostart enabled ↳Unable to read OpenCPN FP configuration What could be causing this problem ? RE: OpenPlotter 3 roadmap - Hobo - 2022-04-16 Hi, I have installed Openplotter 3 and from there installed OpenCpn 5.6 Flatpak When I start it through open plotter or via terminal (flatpak run org.opencpn.OpenCPN) I get the following response : Invalid MIT-MAGIC-COOKIE-1 key15:22:44: Error: Unable to initialize GTK+, is DISPLAY set properly? If I do a startup check, I get : Checking OpenCPN... | running | | FP fullscreen autostart enabled ↳Unable to read OpenCPN FP configuration So the problem is OpenCpn does not start up at the screen, what could be the cause of this problem ? RE: OpenPlotter 3 roadmap - Sailoog - 2022-04-24 have you changed the user name of your system after installing opencpn with flatpak? Are you in a headless system? Try this: sudo flatpak run org.opencpn.OpenCPN or try to uninstall and reinstall. RE: OpenPlotter 3 roadmap - Opie91 - 2022-04-25 Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled. Updated Avnav a few days back and it auto enabled on me. It had me chasing my tail for a bit. RE: OpenPlotter 3 roadmap - wellenvogel - 2022-04-25 (2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled. would be interesting to get some more info on that. Normally they should not interfere at all. RE: OpenPlotter 3 roadmap - jtaraskin - 2022-04-26 Hey, I installed OpenPlotter 3 on my raspi 4. After some configurations, I can't open the openplotter-network. This is the result Trace: openplotter-network Traceback (most recent call last): File "/usr/bin/openplotter-network", line 11, in <module> load_entry_point('openplotterNetwork==3.1.2', 'console_scripts', 'openplotter-network')() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 975, in main MyFrame().Show() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 85, in __init__ self.pageClient() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 863, in pageClient self.read_wlan() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 899, in read_wlan self.client_bitRate1.SetValue(self.find_line_split_set2(wlan_info,"Rate","=",1).split(" ")[0]) AttributeError: 'NoneType' object has no attribute 'split' RE: OpenPlotter 3 roadmap - Opie91 - 2022-04-26 (2022-04-25, 01:06 PM)wellenvogel Wrote:(2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled. Do not know what to say. Just it has been my experience that they OpenCPN FP will not open with the Avnav service running. I have turned Avnav service on/off and it is definitely repeatable. RE: OpenPlotter 3 roadmap - wellenvogel - 2022-04-26 (2022-04-26, 05:13 PM)Opie91 Wrote:(2022-04-25, 01:06 PM)wellenvogel Wrote:(2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled. Do you have some logs (e.g. OpenCPN log)? And what is the error? Does OpenCPN not come up? Does it crash? Is it unable to display some charts? Can you try to start from the command line? RE: OpenPlotter 3 roadmap - Sailoog - 2022-04-26 (2022-04-16, 02:06 PM)Hobo Wrote: Hi, I have been able to reproduce this error. It happens when using OpenPlotter headless. This is my error: Code: (opencpn:2): Gdk-ERROR **: 18:54:58.144: The program 'opencpn' received an X Window System error. I have reported this to OpenCPN devs, thanks for notifying: https://github.com/OpenCPN/OpenCPN/issues/2628 RE: OpenPlotter 3 roadmap - Sailoog - 2022-04-26 (2022-04-26, 12:34 PM)jtaraskin Wrote: Hey, what configurations? manual network configurations or configurations through the openplotter interface? Try uninstalling openplotter-network app from settings and reinstalling again. |