OpenPlotter 3 roadmap - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: OpenPlotter 3 roadmap (/showthread.php?tid=3878) |
RE: OpenPlotter 3 roadmap - Paul M - 2022-05-21 System check shows signal k not running I ran signal k installer and re-installed This may be expected? (2022-05-21, 05:53 PM)Sailoog Wrote: OK, that sounds like a progress Thanks Sailoog, glad I can contribute RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-21 New versions for settings, dashboards, signal k and opencpn fixing errors. To avoid problems with old versions first update settings and click on "add sources", then update the rest of apps. RE: OpenPlotter 3 roadmap - Paul M - 2022-05-21 Sailoog, Thanks for Turing round these releases so quickly. Update sequence completed as suggested. Check system results: Checking NTP server... | running Checking Power off management... | disabled Checking Shutdown management... | disabled Checking OpenPlotter autostart... | enabled Checking rescue mode... ↳enabled Checking debugging mode... | disabled Checking system log file size... | System log file size: 1.6 MB Checking OpenPlotter packages source... | added Starting MAIANA transponder... Checking MAIANA transponder... | not running ↳There is no MAIANA device defined The access request must be aproved with read/write permission in Signal K administrator. Starting Dashboards... Starting Notifications... Checking Notifications... | Access to Signal K server validated ↳Notifications is in rescue mode Checking serial connections alias... | All your serial connections have an assigned alias Checking Signal K server... | running Checking serial connections conflicts... | no conflicts Checking network connections conflicts... | no conflicts Checking GPIO conflicts... | no conflicts STARTUP FINISHED No further testing today. RE: OpenPlotter 3 roadmap - Didier B - 2022-05-22 (2022-05-21, 05:49 PM)Paul M Wrote: I get the following response when adding sources: I downloaded OP3 starting-64 today. I had the same issue, and solved it thanks to Sailoog above suggestion . Rest of the aps is being installed right now, Ill come back at the soonest with 1st impressions RE: OpenPlotter 3 roadmap - Paul M - 2022-05-22 The problem I had with influx was my mistake, I hadn’t realised that the signal k key needs to be prefixed with ‘self.’ Data now being stored in the influx db 2 bucket. I’ve begun looking at the network (Wi-Fi) configuration with rpi os 64 and op3. I pre-configured the settings using raspberry pi imager v1.7.2 hostname, ssh password, ssid, password etc.and it worked ok. I added a second Wi-Fi (usb dongle) on my pi4. Intending to use it as a hotspot a) using a ralink device - the ssid and password were mirrored from the main Wi-Fi on the pi and - op3 network app opened b) using a different Wi-Fi dongle (realtek) - the dongle remained unassociated - op3 network app failed to start. Running Openplotter-network gives the following response: pi@raspberrypi:~ $ openplotter-network Traceback (most recent call last): File "/usr/bin/openplotter-network", line 11, in <module> load_entry_point('openplotterNetwork==3.1.2', 'console_scripts', 'openplotter-network')() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 975, in main MyFrame().Show() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 85, in __init__ self.pageClient() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 863, in pageClient self.read_wlan() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 899, in read_wlan self.client_bitRate1.SetValue(self.find_line_split_set2(wlan_info,"Rate","=",1).split(" ")[0]) AttributeError: 'NoneType' object has no attribute 'split' It may be that the Realtek is not supported, I did have problems with it on the buster release. RE: OpenPlotter 3 roadmap - romton - 2022-05-22 Hi, I'm running OpenPlotter 3 64 bit on my headless RPI 4 running the last bullseye 64 bit and I still have some issues with OpenCPN FP: It still can't open (Error: Unable to initialize GTK+, is DISPLAY set properly?) when avnav-ocharts plugin is enabled. And when I disable it or when Avnav is not running, OpenCPN FP opens but it is very slow and I noticed several bugs: - No matter what I do, I always have the "Unable to read OpenCPN FP configuration" in Check system. - When I type "sudo flatpak run org.opencpn.OpenCPN" I have the error: app/org.opencpn.OpenCPN/aarch64/master not installed - When I type "flatpak run org.opencpn.OpenCPN" (without sudo), it opens but I have the bug report: In pixman_region32_init_rect: Invalid rectangle passed Set a breakpoint on '_pixman_log_error' to debug - When it opens, it always starts acting like it had previously crashed (asking if I want to disable plugins), it starts with a 0x0 window size unless I closed it in maximized or in full screen mode. It does it too with the Options window or the Object query window. - When I open the Options windows, I have a lot of these recurring messages: (opencpn:2): Gtk-CRITICAL **: 16:58:59.917: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkScrollbar (opencpn:2): Gtk-CRITICAL **: 16:58:59.918: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkScrollbar (opencpn:2): Gtk-CRITICAL **: 16:59:00.290: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkScrollbar (opencpn:2): Gtk-WARNING **: 16:59:00.291: Negative content width -1 (allocation 1, extents 1x1) while allocating gadget (node notebook, owner GtkNotebook) (opencpn:2): Gtk-WARNING **: 16:59:00.291: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node notebook, owner GtkNotebook) (opencpn:2): Gtk-CRITICAL **: 16:59:00.291: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkNotebook (opencpn:2): Gtk-CRITICAL **: 16:59:00.292: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkNotebook (opencpn:2): Gtk-WARNING **: 16:59:00.292 Negative content width -2 (allocation 0, extents 1x1) while allocating gadget (node header, owner GtkNotebook) (opencpn:2): Gtk-CRITICAL **: 16:59:00.292: gtk_box_gadget_dristribute: assertion 'size >= 0' failed in GtkNotebook (opencpn:2): Gtk-WARNING **: 16:59:00.316 Negative content width -33 (allocation 1, extents 17x17) while allocating gadget (node button, owner GtkButton) (opencpn:2): Gtk-WARNING **: 16:59:00.316 Negative content height -9 (allocation 1, extents 5x5) while allocating gadget (node button, owner GtkButton) ... Let me know if there is anything I can do to help. Thank you again for your incredible work. Best regards. Romain RE: OpenPlotter 3 roadmap - jtaraskin - 2022-05-23 (2022-05-22, 07:24 PM)Paul M Wrote: The problem I had with influx was my mistake, I hadn’t realised that the signal k key needs to be prefixed with ‘self.’ Data now being stored in the influx db 2 bucket. I got the same problem. RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-23 Paul M and jtaraskin, could you please put here the chipset models of your devices? usually you can know that opening a terminal an typing lsusb after pluging in the device. This is obviously a bug, we can not break the app when non compatibles devices are connected, or maybe they are compatible and there is another problem, let's see. EDIT: please send me also the output of iwconfig command when the devices are connected. RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-23 (2022-05-22, 10:13 PM)romton Wrote: Hi, Just ignore these errors: In pixman_region32_init_rect: Invalid rectangle passed Set a breakpoint on '_pixman_log_error' to debug (opencpn:2): Gtk-CRITICAL **... Those are non critical and expected issues and do not affect performance. I have opened a new thread to try to fix the Avnav issue: https://forum.openmarine.net/showthread.php?tid=4063 RE: OpenPlotter 3 roadmap - Paul M - 2022-05-23 Lsusb and iwconfig Realtek dongle: pi@raspberrypi:~ $ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 09da:024f A4Tech Co., Ltd. RF Receiver and G6-20D Wireless Optical Mouse Bus 001 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge Bus 001 Device 003: ID 1546:01a7 U-Blox AG [u-blox 7] Bus 001 Device 006: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub pi@raspberrypi:~ $ i@raspberrypi:~ $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11 ESSID:"vodafonexxxxxx” Mode:Managed Frequency:5.5 GHz Access Point: D6:35:1D:07:05:6B Bit Rate=433.3 Mb/s Tx-Power=31 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=70/70 Signal level=-38 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1 Invalid misc:0 Missed beacon:0 wlan1 unassociated ESSID:"" Nickname:"<WIFI@REALTEK>" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 |