(2023-06-21, 08:00 PM)Polonioli Wrote: hello my problem is when you add new serial device (in my case gps ublox 7 or 8) signalk only recognize in caseyou add "remember port (position on the usb-hub).." you add remember number device NOT WORKING signalk not RECOGNIZE connection , this bug is for vrsion V3 because in V2 work very fine.
And in case you add remember port whats working in Signalk you have later problem with dasboard in opencpn , because not recognize connection.
Thsnk ypu sailoog for your help and sorry disturb

(2023-06-26, 09:37 PM)Sjoerd02 Wrote: After a reboot or restart of the RPI it takes a while before the InfluxDB 2.0 is started.
Because the influxDB is not yet started SK DB plugin fails to connect to the DB.

This can be solved by restarting the SK after let's say 10 sec's
In the old version this was not an issue (other OP, Other DB, Other SK plugin)

Is it possible to delay the start of SK so the DB will be available?
Or restart the SK automaitcally afer the DB become available?

Thanks Sjoerd

(2023-07-02, 07:36 PM)kersau Wrote: bonjour, je viens vers vous car je voudrais refaire une installation de sur une carte SD pour utilisation sur Raspberry PI4. Cependant j'ai bien coupé sur ma carte SD avec Win32disk imager. Néanmoins lorsque je le mets en route le sus
système , celui-ci bloque sur l'écran multicolore. que ce soit sur 32 bits ou 64 bits.
Et je suis sur que ce n'ai pas un problème du Raspberry car il je remet mon ancienne le système fonctionne bien. 

(2022-02-17, 10:14 AM)PaddyB Wrote:

(2022-02-16, 10:11 PM)Lazzz Wrote:

(2022-02-16, 11:33 AM)PaddyB Wrote: I just keep a saved version of KIP on the server, just takes a moment to reload in the browser

Thanks Paddy - that worked.

I saved them but how do you reload? Do you put the KIP files in the Chromium-browser folder??

Look in settings / configuration >
Save & load from there, I have one saved for laptop & another for a tablet. 


"Maybe you should check in every so often if you are going to keep breaking SK"

Signalk wasn't actually  broken, it's just old data in your browser, just delete the old data.

Slack is the place to talk signalk, much better route to talk to the main & app developers >> http://slack-invite.signalk.org/

(2023-07-12, 04:33 PM)maxchertudi Wrote:

(2022-02-17, 10:14 AM)PaddyB Wrote:

(2022-02-16, 10:11 PM)Lazzz Wrote:

(2022-02-16, 11:33 AM)PaddyB Wrote: I just keep a saved version of KIP on the server, just takes a moment to reload in the browser

Thanks Paddy - that worked.

I saved them but how do you reload? Do you put the KIP files in the Chromium-browser folder??

Look in settings / configuration >
Save & load from there, I have one saved for laptop & another for a tablet. 


"Maybe you should check in every so often if you are going to keep breaking SK"

Signalk wasn't actually  broken, it's just old data in your browser, just delete the old data.

Slack is the place to talk signalk, much better route to talk to the main & app developers >> http://slack-invite.signalk.org/

Hi! I would like to join slack but this lik (http://slack-invite.signalk.org/) doesn't work anymore, how can I get invited? thx