+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: (Solved) No GPS data to Opencpn unless Route is active (/showthread.php?tid=3906)
(Solved) No GPS data to Opencpn unless Route is active - Jodel - 2022-02-04
Hi,
I have my GPS connected to SignalK plus my wind, depth etc to signalK also. I am sending RMB and RMC from Opencpn to signalk. I have tried SignalK protocal to Opencpn and also a TCP connection (so that I can stop RMB and RMC looping).
Either methods of sending data from Signalk to Opencpn result in no GPS data to Opencpn unless a Route is active. All the other data from the NMEA 182 instruments transfer whether a route is active or not.
Any ideas as to where I am going wrong?
Jodel
RE: (Solved) No GPS data to Opencpn unless Route is active - Jodel - 2022-02-07
(2022-02-04, 11:34 PM)Jodel Wrote: Hi,
I have my GPS connected to SignalK plus my wind, depth etc to signalK also. I am sending RMB and RMC from Opencpn to signalk. I have tried SignalK protocal to Opencpn and also a TCP connection (so that I can stop RMB and RMC looping).
Either methods of sending data from Signalk to Opencpn result in no GPS data to Opencpn unless a Route is active. All the other data from the NMEA 182 instruments transfer whether a route is active or not.
Any ideas as to where I am going wrong?
Jodel
When I was setting up th GPS in SignalK "Suppress 0183nmea" was on yes by default.
I selected no and that solved the issue.