3d print controller enclosure - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: 3d print controller enclosure (/showthread.php?tid=3962) |
3d print controller enclosure - kniven - 2022-03-28 Hi all. I am wondering if there exist a file for 3D-printing an enclosure for the high-power motor controller https://pypilot.org/store/index.php?rt=product/product&path=72&product_id=131 I got a link from Sean to this file https://github.com/pypilot/pypilot_models/tree/master/controller_enclosure But this appears too be for the smaller version of the controller. If not, I (actually, a friend) would like to create the file, but it would be best if we could have a drawing, including dimensions and positions of mounting holes and cable connection points. Any hints? RE: 3d print controller enclosure - seandepagnier - 2022-03-30 output.zip (Size: 269.71 KB / Downloads: 121) It would be interesting yes. Do you already have the high power controller I offer? If so it would be possible to measure using calipers. I intend to release the final kicad files in: https://github.com/pypilot/pypilot_schematics in a few weeks. For now I attached a drawing you can use. Please share your enclosure... if possible use openscad RE: 3d print controller enclosure - jim321 - 2022-03-30 i opened the .scad there's an error @ line 108 in openscad. i should have 3 printers online this month, if i get time i'll print a few of them. and if anyone has an .stl file for a box post it i'll do the same when kicad's are posted. i just started playing with ultimate_box .scad pretty cool for customizing boxes. RE: 3d print controller enclosure - seandepagnier - 2022-03-30 I have updated the models |