+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Compass adjustment (/showthread.php?tid=3973)
Compass adjustment - Sailabout - 2022-04-01
My Raspberry Pi 3 with Moitessier Hat (1) is placed 90° from the longitudinal axis of the boat due to the small place and the disposition of the USB and HDMI connectors. How can I add or subtract 90° from the compass value given by the hat?
I should also add a question on how to change pitch and roll . . .
RE: Compass adjustment - holgerw - 2022-04-03
go to "Pipilot" or install it from "Settings". (> 2.x only)
then click on "Calibrate"
you can put in "-90" there and adjust your boat level to zero also.
good luck
Holger
RE: Compass adjustment - Sailabout - 2022-04-04
Thank you