Open plotter psrtly installed? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Open plotter psrtly installed? (/showthread.php?tid=3999) |
Open plotter psrtly installed? - Bynnos - 2022-04-16 Hi I have downloaded Openplotter from Raspberry OS on my RPI4B. 2.9.1-stable is installed and RPI OS was updated from Bullseye to Buster before installation The installation of OP seemed to work fine and I have succeeded to install Serial and XYgrib which both works as they should. Open CPN seems also to be correct installed but cannot be opened. I receive a fault message that I have a faulty file for desktop: “usr/share/applications/-openCPN.desktop” Signal K cannot be installed at all as there is a dependency to python-minimal. The issue could not be corrected due to faulty packages. Anyone here who understand what has gone wrong and what to do? RE: Open plotter psrtly installed? - Sailoog - 2022-04-24 openplotter 2.x.x is only for buster. For bullseye try openplotter 3.x.x: https://forum.openmarine.net/showthread.php?tid=3878 |