+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: AvNav in OpenPlotter 3 (/showthread.php?tid=4063)
AvNav in OpenPlotter 3 - Sailoog - 2022-05-23
@wellenvogel
There are some problems with AvNav in OpenPlotter 3 alpha.
- OpenCPN flatpak does not run when the o-charts plugin of AvNav is running: https://forum.openmarine.net/showthread.php?tid=3878&pid=22906#pid22906
- AvNav kills signal k server: https://forum.openmarine.net/showthread.php?tid=3878&pid=22606#pid22606
any idea?
RE: AvNav in OpenPlotter 3 - wellenvogel - 2022-05-24
I guess it mainly goes to @e-sailing...
I already discussed a bit with him. We found the last version of avnav-installer to be broken (all the user pi stuff).
Killing the signalK server is nothing AvNav really can do - so again only the installer could....
For the OpenCPN flatpack issue:
I have no idea.
Do we have more info beside the one post ?
Currently I most probably do not really have a chance to test this (traveling for a while). What I could imagine :
(1) some LD_LIBRARY_PATH issues
(2) some clashes in display settings (avnav-ocharts uses Xvfb - this should normally not interfere - but you never know).
RE: AvNav in OpenPlotter 3 - e-sailing - 2022-05-24
@Sailoog
Yes.
The problem with signalk is caused by openplotter-avnav when using another user than pi. Fix in work.
There are some other fixes which should be changed in 3.0.5 already.
RE: AvNav in OpenPlotter 3 - Sailoog - 2022-05-25
OK, thanks.
Latest Raspberry OS versions include tools to change the default user pi at first start, so I guess we will no longer see the user pi around.
RE: AvNav in OpenPlotter 3 - wellenvogel - 2022-06-01
We found the issue for OpenCPN flatpack to being able to run with avnav-ocharts plugin running...
Seems to be a bit similar to https://github.com/flatpak/flatpak/issues/3357.
So I will change the avnav-ocharts-provider to use a Xvfb display number different from 99 (the default). Most probably I will make this configurable to be prepared.
On the other hand it's a bit unclear what flatpak is doing there...
RE: AvNav in OpenPlotter 3 - wellenvogel - 2022-06-06
Ok, now the installer 3.0.6 is available that should fix the user issues.
Additionally a new version of the AvNav ocharts-plugin (20220605) is available that should fix the OpenCPN flatpak issue.
RE: AvNav in OpenPlotter 3 - Sailoog - 2022-06-06
I did a quick test with no errors, thanks!
RE: AvNav in OpenPlotter 3 - wellenvogel - 2022-06-08
Could you also check the OpenCPN flatpak issue?