![]() |
pypilot hat 0.27 keypad connection - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: pypilot hat 0.27 keypad connection (/showthread.php?tid=4126) |
pypilot hat 0.27 keypad connection - peterbb@telus.net - 2022-06-23 I recently purchased a Pypilot Hat version 0.27, and the small motor controller. The available schematic for the hat is apparently for a previous version. It shows a connector J1 for a keypad, but there doesn't appear to be a similar connector on the 0.27 Hat. Is there a convenient way to connect a keypad to this version of the Hat? There does appear to be a row of holes for external connections on one edge of the board, but any lables for those holes are hidden by the display. RE: pypilot hat 0.27 keypad connection - seandepagnier - 2022-06-24 Try this: https://pypilot.org/schematics/pypilot_hat.pdf RE: pypilot hat 0.27 keypad connection - peterbb@telus.net - 2022-06-24 Thank you. It would be helpful if you could put the PCB version number on the schematic. RE: pypilot hat 0.27 keypad connection - seandepagnier - 2022-06-24 This is a good idea. I will for the next one. |