Extract Tracks? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Extract Tracks? (/showthread.php?tid=4164) |
Extract Tracks? - Finbar J - 2022-08-01 Hi all This might be a stupid question, but can tracks & passage plans be extracted some how from the older OpenPlotter, and be read on the latest 64 bit version? I have a number of sd cards & an SSD with different versions of open plotter, but would be interested in copying them to my new build I am putting together. I did use the beta for a couple of trips (LOS sailing in waters I knew) and wouldlike to keep them in this years log (if its possible).... I couldnt find anything - and didnt want to mess up a new build before I start! If there are any compatibility issues, then its OK and I wont do it - thems sometimes the breaks with beta software Kind regards Finbar J (Iris - Golden Hind 26) RE: Extract Tracks? - affinite - 2022-08-02 On Old build Open OpenCPN Route and Mark Manager Export all visible (to a USB memory stick) On New build Open OpenCPN Route and Mark Manager Import all (from your USB stick) RE: Extract Tracks? - PaddyB - 2022-08-02 If you have a "main" previous installation then you can copy the navobj.xml file from inside the opencpn directory into the same location on your new installation - all waypoints, routes, tracks are stored in that file by opencpn. RE: Extract Tracks? - Finbar J - 2022-08-02 Thanks All |