OpenCPN Crashes connected to SignalK - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: OpenCPN Crashes connected to SignalK (/showthread.php?tid=4188) |
OpenCPN Crashes connected to SignalK - Bijoux - 2022-08-20 I am having an issue when getting my NMEA data through SignalK. OpenCPN will lock up after about 5 seconds. If I delete the signalK connection in OpenCPN and configure it to go directly to my NMEA source there are no issues. Current SETUP: NMEA Source - Miniplex on ethernet - UDP feed on 10110 Data source is NMEA 2000 feed and also AIS RPI 4 - 4MB Any recommendations? RE: OpenCPN Crashes connected to SignalK - PaddyB - 2022-08-20 (2022-08-20, 01:53 PM)Bijoux Wrote: Any recommendations? Sounds like it's the same as this issue discussed on cruisersforum, not read the whole thead but think a fix was issued? https://www.cruisersforum.com/forums/f134/opencpn-5-6-2-signalk-connection-causes-freeze-265999-3.html#post3647060 RE: OpenCPN Crashes connected to SignalK - Sergi C. - 2023-01-11 Hello, After updating opencpn to 5.6.2 and signalk to the latest version, I have problems with the connection in opencpn with signalk through port 3000, since it leaves stucked opencpn, the only solution I have found is to disable the serial connection (nmea0183 with a usb gps) so that the sentences do not reach opencpn. I have a pican-m hat and I need the signalk connection (3000) to get the nmea2000 sentences (AIS&shipmodul hub), the work around has been to create the serial connection directly gps -> opencpn and keep the signalk connection without GPS data. David Register has worked on the bug and has published this update, however I can't get it to work on OPV2 32 bits or OPV3 64 bits. https://launchpad.net/~bdbcat/+archive/ubuntu/opencpn Can someone help me test this beta? 5.7.1 What should this .deb be? https://launchpad.net/~bdbcat/+archive/ubuntu/opencpn/+files/opencpn_5.7.1+7629+e05722fbe~ubuntu22.04.1_armhf.deb Thank you Sergi |