Motor Controller Not Found - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: Motor Controller Not Found (/showthread.php?tid=4380) |
RE: Motor Controller Not Found - Kennyboy - 2023-09-01 Sean said it could be hardware or software and it turned out to be a bit of both, I bought two A2231 optocouplers and one was only working on one channel so that was easily sorted. Also I had a Rpi4 so I loaded openplotter on it and then tried to set that up to connect via serial data, I still only have a vague idea of the serial connections on openplotter and once created I don't seem to be able to clear them but as 'Ironman' suggested-try starting over again and it worked.... One thing I've never seen written is that you don't need the +V supply from the Rpi4 for the serial connection to work, the optocoupler works from the Arduino 5V supply. I hope that may help someone else like me possibly. Also I found out that opencpn works so much better (quicker) from openplotter than my windows tablet....all I need is a waterproof 1000 nit screen now.... |