+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Any charge regressed on Pi following a reboot (/showthread.php?tid=4388)
Any charge regressed on Pi following a reboot - Sea-and-Sea - 2022-12-27
I've got a weird PI related problem. I'm running Openplotter, InfluxDB and Grafana. Config changes are being lost on reboot of the Pi.
I deleted an old sensor, added a couple of new sensors, configured them in Openplotter and SignalK. All working fine. Added them in a Grafana dashboard, made other dashboard tweaks, all looking brilliant.
Last night i rebooted the Pi, when it came back up all of the above changes has regressed. The whole lot - including the deleted sensor being back again in SignalK.
Any ideas what might be going on here????
I tried checking if I'd made the Pi read-only somehow. i can create a new folder, no errors. i can create a text file in the new folder, save, close, open and amend the text i the file and save again and reopen. all with no issues. when i reboot the file and folder are gone.
RE: Any charge regressed on Pi following a reboot - tkurki - 2022-12-27
Google for raspberry pi file system changes lost on reboot and you’ll see others having similar problems.
Get a new sd card and try salvaging your setup onto that.
RE: Any charge regressed on Pi following a reboot - Sea-and-Sea - 2022-12-31
(2022-12-27, 06:54 PM)tkurki Wrote: Google for raspberry pi file system changes lost on reboot and you’ll see others having similar problems.
Get a new sd card and try salvaging your setup onto that.
Thanks, the problem was indeed a failed sd card.
thanks for your support