how to add motor controller to Pypilot? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: how to add motor controller to Pypilot? (/showthread.php?tid=4389) |
how to add motor controller to Pypilot? - Gennady - 2022-12-28 Hi! I am trying to write a manual for everyone on how to install the Pypilot and use it to control the vessel. So many people feel frustrated and give up! On the version I did for myself, everything was working. Now, I am trying to repeat the experiment with a new micro SD card. The problem I ran into is that the Raspberry computer cannot find the motor controller. The message on the computer: "Warning: no motor controller", even though the power is applied to the motor controller, and the red light in the controller is on. On the computer screen, I see message: "The device /dev/ttyAMAO in UART0 should be added to the list of serial ports pypilot manages". So, how does one do that? Please help me, so I can help everybody. Thanks. Gennady RE: how to add motor controller to Pypilot? - seandepagnier - 2022-12-30 There should be "Services" and "Serial" tabs in openplotter-pypilot. Can you add /dev/ttyAMA0 ? |