Operate Tinypilot Pypilot services through Openplotter remotely - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: Operate Tinypilot Pypilot services through Openplotter remotely (/showthread.php?tid=4480) |
Operate Tinypilot Pypilot services through Openplotter remotely - Erickalon - 2023-02-14 Hi all, I have installed Tinypilot 0.32 and Openplotter 3 since some time, but something is still not clear for me despite reading Ironman's useful workbook, what is the good way to use services from Openplotter. I have installed Pypilot on Openplotter. Services are running fine when started from terminal, but at each system starting I got an advertisement on check system "The access request must be approved with read/write permission in Signal K administrator". Did I have to allow this access to Openplotter Pypilot without any risk of confusion between Tinypilot Pypilot and Openplotter Pypilot? Thanks for your help. |