Rudder Sense Resistor Network - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: Rudder Sense Resistor Network (/showthread.php?tid=4503) |
Rudder Sense Resistor Network - Luke - 2023-03-04 Looking for clarification re: connection of pot for rudder sense.... Is the pot (and any associated additional connected resistors) in addition to R7,R8 & R9 (J3) or 'in place of' for the connection to A4? Many thanks. RE: Rudder Sense Resistor Network - seandepagnier - 2023-03-06 It depends on the motor controller. The adc voltage range is either 0-1.1 volts or 0-5 volts, so depending on this, there are sometimes additional resistors. |