+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: SDR Airspy HF+ (/showthread.php?tid=4526)
SDR Airspy HF+ - vincenthure - 2023-03-15
Hello,
I would like to install the driver for the SDR Airspy HF+ to use as a radio for meteo forecast.
I get on github :
- airspy/airspyhf
- pothosware/SoapyAirspyHF
- pothosware/SoapySDR
I install all this software but the device didn't appears in the input parameters of GQRX!
Does anyone use this device?
best regards
Vincent
RE: SDR Airspy HF+ - vincenthure - 2023-03-17
Hello again,
In the QTRX doc, it suggest to install the driver with csete/gr-osmosdr-gqrx (github)
But when I try do it, it tell me it's impossible because Gnuradio is not in 3.9 !
Do you think it's possible to upgrade the gnuradio in Openplotter?
Vincent
RE: SDR Airspy HF+ - Sailoog - 2023-03-19
sudo apt update
sudo apt upgrade
should update all packages to the latest available versions
RE: SDR Airspy HF+ - DroZDi - 2023-03-19
For me if the GQRX doesn't see the device it means it is not properly installed in the system.
Is AirSpy seen under different soft? SDR# / SDR++?
Try this: https://github.com/gat3way/gr-osmosdr-gqrx/tree/airspyhf
Another idea:
# sudo apt-get update
Install libairspyhf-dev deb package:
# sudo apt-get install libairspyhf-dev
Q: Do you think it's possible to upgrade the gnuradio in Openplotter?
A: For my knowledge, gnuradio is needed to install GQRX not openplotter itself (see https://github.com/gqrx-sdr/gqrx)
Another idea: please update firmware in your device AirSpy HF+