Signal K connection can not locate bindings file, fresh install! - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Signal K connection can not locate bindings file, fresh install! (/showthread.php?tid=4575) |
Signal K connection can not locate bindings file, fresh install! - RickardT - 2023-04-11 I have fresh installed 64bit openplotter on a rpi4 according to the installation instruktion. It however seems that this image needs update with influxdb and grafana certificate verification. "Err:7 https://packages.grafana.com/oss/deb stable Release Certificate verification failed: The certificate is NOT trusted. The certificate chain uses expired certificate. Could not handshake: Error in the certificate verification. [IP: 151.101.86.217 443]" I found some guidance on the net to install the latest Grafana and influxdb, but first by installing chrono since the NTP did not work. Added a usb GPS but got stuck at: Error in "Connection & Plugin Status" Could not locate the bindings file. Tried: → /usr/lib/node_modules/signalk-serv... I have tried this with two reinstallations, and also stuck at the same point on a upgrade of an earlier openplotter installation. I have Temporarily got the usb GPS to work but "some, forgot which" upgrade made i fail with the binding to the file error above. Tried to reinstall Signal K, in different ways, several times. Any guidance? RE: Signal K connection can not locate bindings file, fresh install! - RickardT - 2023-04-12 I tried reinstallation a third time and now saw that after pushing start of signal K, the post-installation hung at npm info run socketcan@4.0.3 install and never finished. This is probably why I have the "bindings faults" But what can be done to pass the socketcan@4.0.3 install ? RE: Signal K connection can not locate bindings file, fresh install! - PaddyB - 2023-04-12 try asking the signalk guys > https://signalk-dev.slack.com/join/shared_invite/zt-1leccop43-KrU7G6yBq9g91KXjZtNg1g#/shared-invite/email RE: Signal K connection can not locate bindings file, fresh install! - Sailoog - 2023-04-12 grafana and influxdb changed their certificates, installing the last version of openplotter-dashboards app fixes the problem. RE: Signal K connection can not locate bindings file, fresh install! - cybardev - 2023-05-03 (2023-04-12, 03:53 PM)Sailoog Wrote: grafana and influxdb changed their certificates, installing the last version of openplotter-dashboards app fixes the problem. I apologize for the naïve question, but how would I go about installing the last version of openplotter-dashboards? Is there a GUI option, or a command for it? RE: Signal K connection can not locate bindings file, fresh install! - Sailoog - 2023-05-09 https://openplotter.readthedocs.io/en/latest/settings/settings_app.html#appcandidates-get-candidates |