MacArthur default Settings - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: MacArthur HAT (https://forum.openmarine.net/forumdisplay.php?fid=29) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=30) +--- Thread: MacArthur default Settings (/showthread.php?tid=4587) |
MacArthur default Settings - holgerw - 2023-04-14 I would like an "Arthur defaults" Checkbox to set the defaults to "/boot/config.txt" or an Docu for the Settings here, so not everyone has to get into the internals of the HAT to check the Pinouts. Holger RE: MacArthur default Settings - Sailoog - 2023-04-14 You have that in the documentation: https://raw.githubusercontent.com/OpenMarine/MacArthur-HAT/main/Documentation_low.pdf chapters: - Power management - Configuration - NMEA 2000 - configuration" RE: MacArthur default Settings - holgerw - 2023-04-14 ok, thanks for the link and your development. Even there are some special double uses for connections: but some are not modificable and default for the HAT. These should be easy settable with an checkbox from the config app. I would also like an output for the cooling FAN, maybe in the next Version. RE: MacArthur default Settings - Sailoog - 2023-04-15 Do you mean a specific app to configure some features with just one click? We'll see if there's demand for that when the HAT is in production. You can connect a cooling fan to any GPIO. |