SignalK Source Priority - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: SignalK Source Priority (/showthread.php?tid=4730) |
SignalK Source Priority - TVR - 2023-06-29 I have 2 GPS devices attached to OpenPlotter, each of them outputs 13 SignalK fields (position, COG, SOG etc). Is there a simple way to set one device as the default (or higher priority) device in SignalK? I can go into "Server / Data Connections / Source Priorities Settings", but then I need to assign priorities for all 13 fields separately. Am I missing anything obvious? Simple use case : if Maiana is powered on, I want to use its internal GPS since this is up on the pushpit. Otherwise I want to automatically fall back to the USB dongle in the cabin. RE: SignalK Source Priority - tkurki - 2023-06-29 Sorry, no shortcut. Doing it by source would make sense, but nobody has implemented that yet. RE: SignalK Source Priority - TVR - 2023-06-29 Thanks for confirming tkurki. Should I raise an improvement suggestion somewhere? RE: SignalK Source Priority - tkurki - 2023-06-30 https://github.com/SignalK/signalk-server/issues RE: SignalK Source Priority - TVR - 2023-06-30 Done : https://github.com/SignalK/signalk-server/issues/1571 |