RNC Charts phasing out - low res only - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: RNC Charts phasing out - low res only (/showthread.php?tid=4809) |
RNC Charts phasing out - low res only - McNugget - 2023-07-30 The latest RNC charts are in some cases extremely low resolution. Is there an archive for RMC charts so that we can at least use the old ones that had a much higher resolution? For instance, further in the south bay area, the resolution is essentially nonexistent. I would really like to have the channels and the buoys back. RE: RNC Charts phasing out - low res only - PaddyB - 2023-07-30 (2023-07-30, 03:47 AM)McNugget Wrote: The latest RNC charts are in some cases extremely low resolution. Is there an archive for RMC charts so that we can at least use the old ones that had a much higher resolution? For instance, further in the south bay area, the resolution is essentially nonexistent. Both your issues are regarding opencpn, better place to raise them would be https://www.cruisersforum.com/forums/f134/ RE: RNC Charts phasing out - low res only - McNugget - 2023-07-30 Both my issues were resolved by switching to the flatpack version which for is recommended only for non-lts Linux versions for some reason. It’s 5.8.1-1. Seems much improved in terms of performance! RE: RNC Charts phasing out - low res only - PaddyB - 2023-07-30 (2023-07-30, 06:04 AM)McNugget Wrote: Both my issues were resolved by switching to the flatpack version which for is recommended only for non-lts Linux versions for some reason. It’s 5.8.1-1. Seems much improved in terms of performance! good news you got it sorted out. New versions of opencpn take a while to filter down to linux so flatpak is generally recommended. Also the latest plugins should be available. |