+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: uart0 gone missing (/showthread.php?tid=4827)
uart0 gone missing - PhilipL - 2023-08-09
I have had problems getting pypilot connecting to the motor controller.
It worked two days ago but sorting other problem may have lef to this one.
When I enable all 5 uarts with the serial 3.3.0, they all appear except uart0, which I need for the pypilot motor controller.
The only other device is a usb gps puck which is working fine.
What might the problem be?
RE: uart0 gone missing - PhilipL - 2023-08-11
I posted my problem on the OpenCPN forum but they told me to go away. So, here is my problem again:
Where is /dev/ttyAMA0? I cannot find it and not sure whether it has been disabled somehow. When I select all the GPIO uart options, they all come up except the one I need for PyPilot. The only other device which shows up is the GPS USB puck /dev/ttyACM0. Any suggestions?
I can't seem to post an image of the devices which show up but it's over here: https://www.cruisersforum.com/forums/f134/one-last-try-with-this-forum-278566.html