+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: [SOLVED] 0.11.5 Wont recognize more than one MCP3208 channel (/showthread.php?tid=491)
[SOLVED] 0.11.5 Wont recognize more than one MCP3208 channel - affinite - 2017-05-14
I have 3 inputs to my MCP3208 ADC configured as tank level sensors.
In OP I have allocated SK tags to each I/Pl
(Fuel.currentvolume, Fresh Water.currentvolumeand Wast Water.currentvolume)
I can see SignalK data from any one of the channels if I set only 1 of them to be active but if I set more than 1 to be active, I get no data.
Thanks
Steve
RE: 0.11.5 Wont recognize more than one MCP3208 channel - e-sailing - 2017-05-14
Ok. Fix is coming.
RE: 0.11.5 Wont recognize more than one MCP3208 channel - Sailoog - 2017-05-15
e-sailing's fix will be added to 0.11.6