+- OpenMarine (https://forum.openmarine.net)
+-- Forum: MacArthur HAT (https://forum.openmarine.net/forumdisplay.php?fid=29)
+--- Forum: MacArthur HAT cases and enclosures (https://forum.openmarine.net/forumdisplay.php?fid=33)
+--- Thread: Case for Pi5 with MacArthur HAT and NVME (/showthread.php?tid=5207)
Case for Pi5 with MacArthur HAT and NVME - ozone_one - 2024-02-25
I have posted my take on a case for an RPi5 with MacArthur HAT and Pimoroni bottom NVME. I have printed and assembled it and it does work, but I may revise in the future should I see the need for a small 2510 cooling fan to help keep things cool.
I will also be posting a STEP file eventually, but I need to do a little cleanup first.
https://www.printables.com/model/781587
RE: Case for Pi5 with MacArthur HAT and NVME - Sailoog - 2024-02-27
Cool!
I miss a slot for the SD card and a hole for the RPi5 power button.
RE: Case for Pi5 with MacArthur HAT and NVME - AndyV - 2024-04-23
(2024-02-25, 11:35 PM)ozone_one Wrote: I have posted my take on a case for an RPi5 with MacArthur HAT and Pimoroni bottom NVME. I have printed and assembled it and it does work, but I may revise in the future should I see the need for a small 2510 cooling fan to help keep things cool.
I will also be posting a STEP file eventually, but I need to do a little cleanup first.
https://www.printables.com/model/781587
Care to share the fusion 360 model (if thats what you used). I'd like modify your case a bit to include a couple other pieces of electronics, save me a pile of time mapping out the ports etc.