+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: Feature requests (https://forum.openmarine.net/forumdisplay.php?fid=21)
+--- Thread: Enable mdns (/showthread.php?tid=5394)
Enable mdns - Lazzz - 2024-05-11
I was having trouble with 'Autopilot enabled" and Pypilot was stealing data from SK which meant I had no heading or attitude data for OpenCPN or KIP etc.
When I switched to "IMU Only" SK was getting data.
In Serial App "Add to Signal K" & "Add to Pypilot" are greyed out.
I had a look at the Pypilot Workbook > Signal K Connections & turned on mdns in the Server Settings & I was connected to SK!!!!
Maybe this needs to be included in the Docs.
RE: Enable mdns - seandepagnier - 2024-05-13
I dont understand what you mean "pypilot stealing data from SK"
pypilot discovers signalk via mdns, maybe that is what is happening?? This should be automatic so I am not really sure I understand. I didnt know it could be disabled.
pypilot also uses mdns to discover itself, like from different instances or hosts.
RE: Enable mdns - Lazzz - 2024-05-13
(2024-05-13, 07:48 PM)seandepagnier Wrote: I dont understand what you mean "pypilot stealing data from SK"
In the Server Settings mdns was not turned on & when I was in "Autopilot Enabled" there was no data from Pypilot going to SK.
Since I turned on "mdns" all is good.