+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18)
+--- Thread: GY912 IMU module i2c problem with Raspberry Pi 4 (/showthread.php?tid=5590)
GY912 IMU module i2c problem with Raspberry Pi 4 - jatitsku - 2024-07-24
Hi,
I tried this module, and it works, but only when connected to 3.3V power pin on Raspberry, despite the onboard voltage regulator. When connected to 5V, only bus 0 works.
I wanted to share my experience, if someone else has this problem.
Jani