+- OpenMarine (https://forum.openmarine.net)
+-- Forum: MacArthur HAT (https://forum.openmarine.net/forumdisplay.php?fid=29)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=30)
+--- Thread: Unable to boot into RPi5 with latest updates (/showthread.php?tid=5749)
Unable to boot into RPi5 with latest updates - CaptIgmu - 2024-10-13
This was a first. System not usable, would not fully boot after latest RPi5 update. If I removed the MacArthur Hat, everything worked. I have now set my boot order on the RPi5 to SD card then USB drive then NVMe drive, so I can at least recover. Looks like it slows down at some type of raspi-config and gets hung trying to access the network, happens before the initialization of OpenPlotter. Would be nice to have a grub and ARM64 CloneZilla when this happens!
My sudo -E rpi-eeprom-config —edit now looks like this:
[all]
BOOT_UART=1
BOOT_ORDER=0xf641
POWER_OFF_ON_HALT=1
Will backup to SD card before any updates in future, so I can always go backwards . . .
Always remember to tick new partition UUIDs when doing any copying (SD Card Copy).
RE: Unable to boot into RPi5 with latest updates - Adrian - 2024-10-13
There is an issue with the CAN/NMEA2000 integration with the latest update of Raspberry Pi OS. See here on how to temporarily disable the problematic feature while the Linux wizards figure this one out:
https://forum.openmarine.net/showthread.php?tid=5740&pid=31801#pid31801