+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Documentation (https://forum.openmarine.net/forumdisplay.php?fid=16)
+--- Thread: IC2 Pin Assignment for MacAuther Hat (/showthread.php?tid=5812)
IC2 Pin Assignment for MacAuther Hat - fun4all - 2024-11-06
Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat. There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers. The INA219 pins are Vcc, Gnd, Sci, Sda, Vin-, Vin+
RE: IC2 Pin Assignment for MacAuther Hat - Lazzz - 2024-11-06
(2024-11-06, 06:06 PM)fun4all Wrote: Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat. There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers. The INA219 pins are Vcc, Gnd, Sci, Sda, Vin-, Vin+
RE: IC2 Pin Assignment for MacAuther Hat - fun4all - 2024-11-07
(2024-11-06, 08:25 PM)Lazzz Wrote:(2024-11-06, 06:06 PM)fun4all Wrote: Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat. There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers. The INA219 pins are Vcc, Gnd, Sci, Sda, Vin-, Vin+
thank you so much!!!