+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Similar Projects (https://forum.openmarine.net/forumdisplay.php?fid=26)
+--- Thread: Connection to CAN Bus (/showthread.php?tid=6227)
Connection to CAN Bus - easyllama - 2025-05-22
Hey there,
I bought all the hardware from this link: https://www.ardusimple.com/how-to-build-a-low-cost-nmea2000-gnss-compass-with-optional-rtk-functionality/.
I was able to get my simpleRTK3B connected to the Internet for the RTCM corrections. However, I am having problems in connecting the CAN GNSS master to get CAN signals.
Has anyone worked through this guide or know what to do? I've been struggling to wrap my head around this for so long.
Any help in terms of which software to use, how to get started, etc. will be super useful.
Thanks!
RE: Connection to CAN Bus - easyllama - 2025-05-28
(2025-05-22, 06:27 PM)easyllama Wrote: Ok lol I figured out how to get CAN signals. I just don't know how to convert CAN to something readable; I don't have a .dbc file available. Anyone knows?