![]() |
|
Integrating GPS and AIS Signals from Furuno GP-32 and Standard Horizon GX2200E - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: MacArthur HAT (https://forum.openmarine.net/forumdisplay.php?fid=29) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=30) +--- Thread: Integrating GPS and AIS Signals from Furuno GP-32 and Standard Horizon GX2200E (/showthread.php?tid=6435) |
Integrating GPS and AIS Signals from Furuno GP-32 and Standard Horizon GX2200E - furijosi - 2025-09-12 Hey Guys! I always planned to get my Boat-Electronics updated, but now that my Autopilot died I have to do that earlier than expected. Actually I am planning to get a Raspberry 5 with a Mac Arthur Hat from OpenMarine and a PyPilot HAT + Motor controller from NaviTop. On Board I have a Furuno GP-32 and a Standard Horizon GX2200E VHF with AIS. Do you know, if I can use the GPS signal from the GP-32 and the AIS from the GX2200E for OpenPlotter? They both have NMEA Connection as far as I understood that. But since I am compeltely new to the whole subject I am not sure. Otherwise I am thinking about getting the MAIANA Antenna, but if it is not necessary I would like to safe me that money. Best regards, Johannes |