Change VNC Server Resolution? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Change VNC Server Resolution? (/showthread.php?tid=791) |
Change VNC Server Resolution? - Leigh - 2017-10-06 Hi, I have my 15.01 version OP working via VNC to my Nexus 7 2012, but the VNC server resolution is not quite right. Could someone tell me what I have to alter/add to config.txt to give 1280x800 resolution, please? Thanks RE: Change VNC Server Resolution? - SkipperEarly - 2017-10-06 Dont know if there is anything special with Nexus 7 but you can set the frame_buffer values e.g. framebuffer_width=1280 framebuffer_height=720 in the config.txt file. Also check the VNC client configuration, in the expert settings tab you can select e.g. full screen although I found its best to leave the values set by the server app (=op) Hope this helps. RE: Change VNC Server Resolution? - Leigh - 2017-10-06 Worked a treat, thanks! Sent from my SM-A310F using Tapatalk |