[SOLVED] Upgrade problem ? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] Upgrade problem ? (/showthread.php?tid=834) |
RE: Upgrade problem ? - pending - waterman480 - 2017-10-29 Are you having problems during the upgrade or after? If during it may be your mobile connection. If after, I am beginning to suspect that you have power issues. SD cards are sensitive to brownouts during writes. Perhaps a better power cord would work. Many of the USB cords are crappy. Last year I had fits with file corruption until I bought new heavy duty cables. Now I now longer have those problems. My most recent build from scratch was about two weeks ago (and unfortunately done over mobile). RE: Upgrade problem ? - pending - Didier B - 2017-10-30 (2017-10-29, 11:27 PM)waterman480 Wrote: Are you having problems during the upgrade or after? If during it may be your mobile connection. If after, I am beginning to suspect that you have power issues. SD cards are sensitive to brownouts during writes. Perhaps a better power cord would work. Many of the USB cords are crappy. Last year I had fits with file corruption until I bought new heavy duty cables. Now I now longer have those problems. My most recent build from scratch was about two weeks ago (and unfortunately done over mobile).I'm using an ETH wired connection (not Wifi). Of course I checked the power supply, I'm using 2 power units 2 000 mA each, 1 for the RPi, the other for the USB Hub. For me the 'path' from Noobs 0.10.0 to release 0.16.0 is dead. I found a quite strange the question which comes up in the process, (but I will not spend a fourth day triyng to cathch it). It was someting like : "We need to uninstal XXXXX, do you agree Y/n ? I may be a not good idea (sic) if ....." I'll be offnet for the coming days (till next WE included). If some one could test the process from Noobs 0.10.0 to OP beta 0.16.0 this would bring some light in the matter ! See you soon ! RE: Upgrade problem ? - pending - shark24 - 2017-10-30 (2017-10-30, 12:38 PM)Didier B Wrote: If some one could test the process from Noobs 0.10.0 to OP beta 0.16.0 this would bring some light in the matter ! Did it by the books two days ago. Formate SD -> copy NOOBS OpenPlotter 0.10 -> install OpenPlotter -> connect to router -> update OpenPlotter to 0.16 beta worked flawlessly RE: Upgrade problem ? - pending - waterman480 - 2017-10-30 (2017-10-30, 12:38 PM)Didier Wrote: "I found a quite strange the question which comes up in the process, (but I will not spend a fourth day tryng to cathch it). It was something like : "We need to uninstall XXXXX, do you agree Y/n ? I may be a not good idea (sic) if ....." RE: Upgrade problem ? - pending - e-sailing - 2017-11-06 There are great changes going on in signalk. At some points OpenPlotter needs updates. But we are not able to use latest signalk with kplex at the moment! I hope the problems in signalk will be fixed soon! RE: Upgrade problem ? - pending - Saqqara - 2017-11-07 Did you try this solution from another thread? It worked for me when I had the same symptoms. Go to: /home/pi/.config/openplotter/openplotter.conf or /home/pi/.openplotter/openplotter.conf and edit and delete all I2C sensors: [I2C] sensors = RE: Upgrade problem ? - pending - Didier B - 2017-11-08 Well, well,well ! Spent 5 1/2 hours on that 4th attempt, see lamentable results below (1) ! OP cannot be started, same as attempts 1, 2 and 3 ! Saqqara : nothing in my I2C section in openplotter.conf, see copy of file content below (2) Waterman480 ; I used an excelent power supply with an attached cable ! I must say it was not the case in attempts 1 and 3 Shark24 : Lucky you are ! Thanks for your answers ! I guess I will sleep on it now (1) === pi@openplotter:~ $ openplotter Signal K starting module.js:471 throw err; ^ Error: Cannot find module 'express' at Function.Module._resolveFilename (module.js:469:15) at Function.Module._load (module.js:417:25) at Module.require (module.js:497:17) at require (internal/module.js:20:19) at Object.<anonymous> (/home/pi/.config/signalk-server-node/lib/index.js:22:15) at Module._compile (module.js:570:32) at Object.Module._extensions..js (module.js:579:10) at Module.load (module.js:487:32) at tryModuleLoad (module.js:446:12) at Function.Module._load (module.js:438:3) [Errno 111] Connection refused Signal K starting module.js:471 throw err; ^ Error: Cannot find module 'express' at Function.Module._resolveFilename (module.js:469:15) at Function.Module._load (module.js:417:25) at Module.require (module.js:497:17) at require (internal/module.js:20:19) at Object.<anonymous> (/home/pi/.config/signalk-server-node/lib/index.js:22:15) at Module._compile (module.js:570:32) at Object.Module._extensions..js (module.js:579:10) at Module.load (module.js:487:32) at tryModuleLoad (module.js:446:12) at Function.Module._load (module.js:438:3) [Errno 111] Connection refused Traceback (most recent call last): File "/home/pi/.config/openplotter/openplotter", line 3535, in <module> MainFrame().Show() File "/home/pi/.config/openplotter/openplotter", line 224, in __init__ self.page_sk() File "/home/pi/.config/openplotter/openplotter", line 2994, in page_sk response = requests.get('http://localhost:3000/signalk') File "/usr/lib/python2.7/dist-packages/requests/api.py", line 60, in get return request('get', url, **kwargs) File "/usr/lib/python2.7/dist-packages/requests/api.py", line 49, in request return session.request(method=method, url=url, **kwargs) File "/usr/lib/python2.7/dist-packages/requests/sessions.py", line 457, in request resp = self.send(prep, **send_kwargs) File "/usr/lib/python2.7/dist-packages/requests/sessions.py", line 569, in send r = adapter.send(request, **kwargs) File "/usr/lib/python2.7/dist-packages/requests/adapters.py", line 407, in send raise ConnectionError(err, request=request) requests.exceptions.ConnectionError: ('Connection aborted.', error(111, 'Connection refused')) pi@openplotter:~ $ (2)Spent === Copy of /home/pi/.config/openplotter/openplotter.conf [GENERAL] version = 0.16.0 state = beta repository = openplotter lang = en # openplotter installation path relative to home op_folder = /.config [AIS-SDR] enable = 0 gain = ppm = channel = a band = gsm_channel = [NMEA0183] sentences = [STARTUP] delay = 0 opencpn = 0 opencpn_no_opengl = 0 opencpn_fullscreen = 1 kplex = 1 x11vnc = 1 vnc_pass = 0 gps_time = 1 maximize = play = 1 sound = /home/pi/.config/openplotter/sounds/Store_Door_Chime.mp3 node_red = 1 [CALCULATE] mag_var = 0 mag_var_rate = mag_var_accuracy = hdt = 0 hdt_dev = 0 hdt_rate = hdt_accuracy = rot = 0 rot_rate = rot_accuracy = tw_stw = 0 tw_sog = 0 tw_rate = tw_accuracy = [N2K] enable = 0 can_usb = pgn_output = pgn_generate = output = 0 [WIFI] enable = 1 ip = 10.10.10.1 device = wlan0 share = 0 ssid = OpenPlotter password = 12345678 hw_mode = g channel = 6 wpa = 2 bridge = 0 [GPIO] sensors = [TWITTER] enable = 0 apikey = apisecret = accesstoken = accesstokensecret = [GMAIL] enable = 0 gmail = password = recipient = [ACTIONS] triggers = [1W] ds18b20 = [UDEV] usbinst = [SMS] enable = 0 serial = 0 bluetooth = connection = enable_sending = 0 phone = [MQTT] broker = port = username = password = topics = [I2C] sensors = [COMPASS] rate = magnetic_h = heel = pitch = deviation = [[0, 0], [10, 10], [20, 20], [30, 30], [40, 40], [50, 50], [60, 60], [70, 70], [80, 80], [90, 90], [100, 100], [110, 110], [120, 120], [130, 130], [140, 140], [150, 150], [160, 160], [170, 170], [180, 180], [190, 190], [200, 200], [210, 210], [220, 220], [230, 230], [240, 240], [250, 250], [260, 260], [270, 270], [280, 280], [290, 290], [300, 300], [310, 310], [320, 320], [330, 330], [340, 340], [350, 350], [360, 360]] variation = [SPI] mcp = [[0, 0, '', '', 0], [0, 1, '', '', 0], [0, 2, '', '', 0], [0, 3, '', '', 0], [0, 4, '', '', 0], [0, 5, '', '', 0], [0, 6, '', '', 0], [0, 7, '', '', 0]] [TOOLS] py = [['Analog ads1115', 'put analog values to SignalK', 'analog_ads1115.py', '0'], ['Analog Firmata', 'put analog values to SignalK', 'oppymata.py', '0'], ['SignalK Simulator', 'change values with sliders and send values to SignalK', 'SK-simulator.py', '0'], ['Auto Setup', 'configure basic system', 'autosetup_tty.py', '1']] RE: Upgrade problem ? - pending - e-sailing - 2017-11-08 The error comes from signalk. Go to .config directory Delete or rename signalk-server-node git clone https://github.com/signalk/signalk-server-node.git cd signalk-server-node npm install RE: Upgrade problem ? - pending - Didier B - 2017-11-12 (2017-11-08, 12:25 PM)e-sailing Wrote: The error comes from signalk.Thanks e-sailing I Did that. 5th - no 6th attempt (on 5th attempt Noobs froze at 3 % of the installation of OP) ! The light improvement is that now, when trying to launch OP, I get that message saying : "SignalK doesn't work. Openplotter will exit because it was not able to start SignalK" It appears that the correction on github doesn't clear the issue ... RE: Upgrade problem ? - pending - waterman480 - 2017-11-12 Having done this many times (and again on Friday), it appears that the problem is at your installation. Bad internet, bad chip, bad power, or failure to allow to get to completion. It also should take less than an hour, so perhaps your internet is the issue. Are you getting message to hit enter to reboot? There are long pauses when nothing happens on the screen. The only time I have ever had problems were when the Raspian server was down for an hour (Friday morning), and when I had a bad power cable. There is definitely not an issue with the software build. Even though it generates many error messages, the end results work. |