Temperature and pression are lost removing power - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: Temperature and pression are lost removing power (/showthread.php?tid=863) |
Temperature and pression are lost removing power - Arruba - 2017-11-16 I have sensor for temperature and pression and I can see the values in SK Diagnostic window. If I remove power, on successive power up the pressure is reported zero and the temperature -271 The only way to have back the correct values is to open NMEA 0183 generator window, delete all listed sentences and hit the “opencpn default” button. Roberto ==== Open plotter 0.16.0 beta Raspberry PI 3 Keyboard, mouse, video, GPS, Eth RE: Temperature and pression are lost removing power - jim321 - 2017-11-17 it does that to me too but i get no data..go to i2c tab and press the restart button ..that works for me. my gps drops out like that too i go to the nema0183 tab and select the auto gp and diagnose then it works again in SK.. it just needs a little kick in the ass sometimes.. RE: Temperature and pression are lost removing power - Arruba - 2017-11-17 Thank you for your reply. Indeed, Restart for me does not work. I hope that this bug can be fixed in the next beta, or at least before the release of the version 1.0 RE: Temperature and pression are lost removing power - Sailoog - 2017-11-19 I will try to reproduce this, thanks. RE: Temperature and pression are lost removing power - Arruba - 2017-11-19 did you need some video showing the problem? Or I have to do some test? Don't hesitate to ask. Ciao Roberto |