+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: Date and time (/showthread.php?tid=89)
Date and time - Adde - 2016-05-09
date and time of issue with OpenPlotter V7 (see image)
Date: 05.06.16 time: 18:00:00
OpenPlotter Date: 16/03/16 time: 11:11:00
OpenCPN time: 16:46:49 UTC
GPS was based with OpenCPN
The inspector gives no indication date, time, longitude, etc ...
RE: Date and time - Arwen - 2016-05-09
(2016-05-09, 02:48 PM)Adde Wrote: date and time of issue with OpenPlotter V7 (see image)
Date: 05.06.16 time: 18:00:00
OpenPlotter Date: 16/03/16 time: 11:11:00
OpenCPN time: 16:46:49 UTC
GPS was based with OpenCPN
The inspector gives no indication date, time, longitude, etc ...
Sorry, there is an error:
Date: 05.06.16 time: 18:00:00
The picture was taken on 06/05/16 to 18:46:49 (local hour)
RE: Date and time - Sailoog - 2016-05-10
You have set the connection with the gps on opencpn and you have to do this on openplotter instead.
Follow the manual: https://sailoog.gitbooks.io/openplotter-documentation/content/en/nmea_multiplexer.html
RE: Date and time - Adde - 2016-05-18
OK, I had not taken the time to translate the English documentation. I noted my mistake ...