"Uredd II" installation - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How I did it (https://forum.openmarine.net/forumdisplay.php?fid=6) +--- Thread: "Uredd II" installation (/showthread.php?tid=99) Pages:
1
2
|
"Uredd II" installation - alekoy - 2016-05-15 "Uredd" is the boats name, it is Norwegian and translates to "Brave" Here are some photos of the work in progress. Todo-list -Install the main computer -N2k network (Actisense+H5000 display) -I2C sensors -Enclosure and secure fastening of PI Etc RE: "Uredd II" installation - Sailoog - 2016-05-16 wow! carbon fibre is beautiful. Thanks for sharing! RE: "Uredd II" installation - alekoy - 2016-05-16 Thanks! RE: "Uredd II" installation - Kraavok - 2016-06-28 (2016-05-16, 12:43 PM)Sailoog Wrote: wow! carbon fibre is beautiful. I second that! Where did you buy it? RE: "Uredd II" installation - alekoy - 2016-06-29 Ebay is your friend Search for carbon fibre plate. I have used a seller called "happychoice2009" for some years and they ship fast via DHL and the plates have always had perfect quality.. RE: "Uredd II" installation - davidbirnie - 2020-05-15 Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v? RE: "Uredd II" installation - alekoy - 2020-05-15 (2020-05-15, 09:55 PM)davidbirnie Wrote: Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v? Old, yes it is the official raspberry pi-display 7".. works on 5V, there is a 12v-usb adapter powering it and the raspberry pi RE: "Uredd II" installation - davidbirnie - 2020-05-18 (2020-05-15, 10:17 PM)alekoy Wrote:(2020-05-15, 09:55 PM)davidbirnie Wrote: Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v? Cool thanks for the reply. A 12v USB adapter... where do you find these? I do like the carbon board solution because I will get a big hole when I remove my radar display which isn't working at all. RE: "Uredd II" installation - alekoy - 2020-05-18 (2020-05-18, 10:18 AM)davidbirnie Wrote:(2020-05-15, 10:17 PM)alekoy Wrote:(2020-05-15, 09:55 PM)davidbirnie Wrote: Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v? RE: "Uredd II" installation - Celestine - 2020-05-18 Hi, I use a couple of these https://www.ebay.com/itm/DC-DC-Micro-USB-Waterproof-12V-to-5V-3A-Step-Down-Converter-Power-Supply-Module/173895296386?hash=item287cf7a582:g:rdYAAOSw02Fc0Ggu One for the rpi and one for the usb hub. Bought mine from France but can’t find that seller now. Cheers Pär W |