2018-06-18, 11:11 AM
An AP mode for RPi 2 will be added on next OP update.
[SOLVED] AP RPi2
|
2018-06-18, 11:11 AM
An AP mode for RPi 2 will be added on next OP update.
An AP mode has been added in OP v1.0.2, test please and reopen this thread if necessary.
2018-06-22, 09:24 PM
Tried and works! great, thanks a lot. :-)
2019-08-01, 02:21 PM
Is there a way of obtaining the Openplotter V1.0.2 as an image, tried the update route but keeps failing.
Also could you please elaborate on the config /etc/* changes that you made. I have a RPi2 with the same AP issue on V1.0.0 image. Many Thanks Colin
2019-08-01, 05:14 PM
(2019-08-01, 02:21 PM)Amaric Wrote: Is there a way of obtaining the Openplotter V1.0.2 as an image, tried the update route but keeps failing. The different updates are not available as an image, as far as I know. The networking stuff in /etc/* is plain raspian, OP has just scripts changing the config files according to the settings in OP network-tab. So you can edit these files directly, if necessary. I took my RPi2 off the boat and connected at home to Ethernet to have the update running through. Otherwise you can also hook up a mobile phone on usb. The latest available update works well on my installation. fair winds Christian
2019-08-02, 09:08 PM
I have tried the update route, all seems well apart from when there is a choice at the end.
install new configuration or keep old which is also default 'N' I assumed it is new as would expect, then appear to have error and return to exit requested. I am out cruising and these updates are eating my data. So any pointers appreciated. I did notice a fresh desktop view when rebooted, but openplotter still only has RPi3 in network. Thanks. Colin
2019-08-04, 09:26 PM
Hi Colin,
I am afraid, I can't help you any further, as I did the update summer 2018, so it's not fresh in memory. And I will be offline for the next three weeks. Hope someone else can kick in. fair winds Christian |
« Next Oldest | Next Newest »
|