2024-05-22, 01:41 AM
Hello - first post so apologies if this has been addressed.
I have never been able to receive Openplotter CPN compass data (HEADING) from the Pi 4 (or now Pi 5) on my NMEA2000 backbone to my Raymarine i70s display (data selected is HEADING). I'm running Em-track B953 (GPS,AIS) into NMEA2000 backbone then out to wifi via Actisense WK1 (send/receive). My IMU is a pimoroni icm-20948 into GPIO pins. I receive most everything else on the i70s from the Pi... XTE, BTW, etc when running a course. On the Actisense I'm accessing 60003 (send/receive) for NMEA1083. And I see the compass heading on my Openplotter dashboard. Is this normally a readable PGN from the Pi for the the i70s? Has anyone been successful with this? If so, any suggestions as to what I am missing.
Thanks so much!
I have never been able to receive Openplotter CPN compass data (HEADING) from the Pi 4 (or now Pi 5) on my NMEA2000 backbone to my Raymarine i70s display (data selected is HEADING). I'm running Em-track B953 (GPS,AIS) into NMEA2000 backbone then out to wifi via Actisense WK1 (send/receive). My IMU is a pimoroni icm-20948 into GPIO pins. I receive most everything else on the i70s from the Pi... XTE, BTW, etc when running a course. On the Actisense I'm accessing 60003 (send/receive) for NMEA1083. And I see the compass heading on my Openplotter dashboard. Is this normally a readable PGN from the Pi for the the i70s? Has anyone been successful with this? If so, any suggestions as to what I am missing.
Thanks so much!