Source for PyPilot 4-pin connector

[chris]

Sean, what's your source for the round, four pin, watertight connector that connects to the motor controller? I have a number of those kicking around but none quite match what you used.

I'd like to have the motor controller 6-8 feet from the PyPilot on the dry side near the battery/actuator rather than running power to and fro.

Thanks!

[Sully]

I'm in the exact same situation.

[seandepagnier]

You can cut the wire and splice your own to extend it but if you must use the connector:

https://www.aliexpress.us/item/2251832777303009.html