2020-05-11, 04:38 AM
I didn’t want to pollute the other thread about SDR AIS in case this is just my system issue or my understanding
I am using OP2 and the SDR AIS module 2.0.1 beta.
In the last couple of days I have tried to calibrate the dVB stock to work with AIS but do not find a channel:
So I ran the calibration tool see the start in the pic below:
and it stabilizes in the low numbers then every so often there is a large variation:
After this it stabilizes out at a number near zero. After that though, if I use this number I still can not find a channel on the GSM-850 band
Does anyone see anything wrong with what I am doing?
I am using OP2 and the SDR AIS module 2.0.1 beta.
In the last couple of days I have tried to calibrate the dVB stock to work with AIS but do not find a channel:
So I ran the calibration tool see the start in the pic below:
and it stabilizes in the low numbers then every so often there is a large variation:
After this it stabilizes out at a number near zero. After that though, if I use this number I still can not find a channel on the GSM-850 band
Does anyone see anything wrong with what I am doing?